Unread Posts

  Topic Title Forum
Espen René Johannessen Fans and ambient temperature  

By Espen René Johannessen 11 hours ago  |  Last Post: 10 hours ago

Questions and Answers
Terry Taylor Extruder Flex Cables  

By Terry Taylor 2 days ago  |  Last Post: 21 hours ago

Technical Support
Marcin Slicers support: current status  

By Marcin 2 weeks ago  |  Last Post: 3 days ago

Questions and Answers
Adrian Harris Screaming Robox  

By Adrian Harris 4 days ago  |  Last Post: 3 days ago

Technical Support
Bert Haverkamp PLA quality differences  

By Bert Haverkamp 4 months ago  |  Last Post: 6 days ago

Rbn Smtk Layer Shifting  

By Rbn Smtk 1 week ago  |  Last Post: 7 days ago

Technical Support
Liberman Shachar can I switch from PLA to soft PLA without damaging the nozzle?  

By Liberman Shachar 1 week ago  |  Last Post: 7 days ago

Questions and Answers
RobWLakes Root RPi Image  

By RobWLakes 2 weeks ago  |  Last Post: 1 week ago

Glasswalker Frustrating SD Card Error  

By Glasswalker 8 months ago  |  Last Post: 2 weeks ago

Technical Support
Marcin ABS shrinkage rate  

By Marcin 2 weeks ago  |  Last Post: 2 weeks ago

Questions and Answers




This community page and the content inside is publicly visible except in restricted groups. A registered community member is able to post content. Because of the open nature of this forum the content posted may not represent the views of CEL. While we do regularly read the content posted, in some cases the content may not be appropriate for the reader or may cause offence. Please help us by reporting such content. Technical advice provided in this forum may be provided with good intention and a belief that is is correct but may not be applicable to all hardware, software or user ability. In some cases content may not be relevant to newer or older revisions, conflicting or incorrect advice may be contained within conversations, community moderators will attempt to add to this or make corrections but to preserve the thread this may be on following pages or be missed as the forum evolves.
For official advice users should contact the CEL support team via and follow the provided advice to preserve safety, warranty and function of Robox hardware or software. This applies to any use or alteration which is not specifically described in the officially supplied guides from CEL. Community content should not be considered official even where posted by CEL employees. Only advice provided via the CEL support portal should be considered official.
Robox is a complex machine with many potential uses, to help preserve the good working order of both hardware and software please be patient and note that many common fixes for other 3D printers do not apply to Robox and may cause irreversible damage or compromise safe operation.




This store is being set up and will not accept orders, please visit for full range. Dismiss


Please Login or Register